Description
Stealth EV Combo 3.3KW 108V Air cooled Charger+1KW DC/DC Converter CAN Controlled OBC On Board Charger is an easy to use and highly configurable charger. The Stealth EV Charger is controllable via CAN using your BMS of choice, such as the Orion2 BMS. The Stealth EV charger uses a CAN Protocol which is common to the Orion2 BMS allowing simple CAN configuration by selecting the Stealth EV charger from a drop down menu in the Orion BMS Software Utility.
The Stealth EV Combo OBC+DCDC is set to 250k Baud Rate.
Contact for freight/postage options.
1. Up to 95% power efficiency and more than 93% Full Load Efficiency
2. Wide input voltage range AC90V~AC264V 45~65 Hz available for worldwide requirements, convenient for electric-network fluctuation and vehicle exportation.
3. Intelligent temperature compensation function in the charging process, preventing damage to the battery caused by charge-off or charge due, greatly extending the lifespan of the battery.
4. Fully-sealed and water-proof, protection class IP67(Effective against dust tight and Protection against Immersion, up to 1 m depth).
5.Operation temperature：- 40℃～85℃；Storage temperature：- 55℃～85℃；Mechanical impact and vibration grade：QC/T 895－2011，Automotive-grade seismic rating.
6. Temperature control with the built-in heat-sensing device and automatic recovery through thermal protection.
7. Multi-safety protection functions.
8. Available for various kinds of batteries like LiFePO4, Lithium battery, etc., Flexible and programmable in charging mode. Equipped with CAN communication interface to realize real-time communication with BMS for options.
10. Input current: dependent on model selected
11. Power factor：≥0.99
12. Charging control: CAN
13. Size：381 x 381 x 203.2 mm L x W x H
14. Weight only 10.9 kg!
15. Cooling: Fan Forced Air Cooling
2. Wide input voltage range AC90V~AC264V 45~65 Hz available for worldwide requirements, convenient for electric-network fluctuation and vehicle exportation.
3. Intelligent temperature compensation function in the charging process, preventing damage to the battery caused by charge-off or charge due, greatly extending the lifespan of the battery.
4. Fully-sealed and water-proof, protection class IP67(Effective against dust tight and Protection against Immersion, up to 1 m depth).
5.Operation temperature：- 40℃～85℃；Storage temperature：- 55℃～85℃；Mechanical impact and vibration grade：QC/T 895－2011，Automotive-grade seismic rating.
6. Temperature control with the built-in heat-sensing device and automatic recovery through thermal protection.
7. Multi-safety protection functions.
8. Available for various kinds of batteries like LiFePO4, Lithium battery, etc., Flexible and programmable in charging mode. Equipped with CAN communication interface to realize real-time communication with BMS for options.
10. Input current: dependent on model selected
11. Power factor：≥0.99
12. Charging control: CAN
13. Size：381 x 381 x 203.2 mm L x W x H
14. Weight only 10.9 kg!
15. Cooling: Fan Forced Air Cooling
Safety protection:
1) Input over/under voltage and reverse polarity protection;
2) Output over current/short circuit and over temp protection.
1) Input over/under voltage and reverse polarity protection;
2) Output over current/short circuit and over temp protection.
Product File Links:
