Description
Volkswagen VW Beetle/Bug EV Conversion Complete Kit, Regen Brakes, Battery Packs 1956-1977
Traction EV is proud to offer complete kits here in Australia. Kits in stock! The VW Type 1 Beetle Kit is very unique in the fact that it truly is a ‘turn-key’ kit. The components were carefully picked out to be the best available for the Beetle, and fit and finish have been refined. This kit comes with everything you need, and we mean everything, right down to the heat shrink tubing, and fuse holders. Just order the kit, and give yourself some spare weekends, and you’ll be on the road. This complete kit will deliver 150km safe driving distance, and will charge to full in a little under 8 hours. The power delivery is 170 pounds of instant torque, and its top speed is over 160 km/h, definitely fun to drive.
The Traction EV NetGain HyPer 9 kit contains the following:
Motor: NetGain HyPer 9 SRIPM Motor 100kW 240Nm with regen brakes
Controller: AC-X1 fully user programmable with Windows PC or Laptop
Instrumentation: AC-X1 Compact Display allows you to view controller information and also control regen braking profiles on the fly.
Transmission Adaptor Kit: Traction EV Billet Aluminium
Brake Pressure Transducer: Regen Brake Signal Sensor – High Quality Amphenol Unit
Charger: Thunderstruck TS2.5C 2.5kW CAN controlled
BMS: DiLithium Design. This BMS communicates with the on-board charger while monitoring cell groups in the Tesla battery modules to keep all cells balanced during charging and driving.
Portable J1772 Charge Cable: Take your charge cable with you anywhere so you can opportunity charge anytime anywhere from 10 amp, 15 amp or J1172 outlets.
J1772 Charge Port Inlet: J1772 Standard Inlet is synchronised with the Thunderstruck Charger Controller for safe charging of your vehicle and prevention of drive-away whilst charge cable is plugged in.
Chill Plate: Traction EV designed to suit NetGain AC-X1 and has integrated mount.
Cooling System for AC-X1: Pump, Reservoir, Radiator and Fans. These are essential to keep the AC-X1 controller cool and safe. Very High quality name brand Dash-AN fittings and hose used through out.
Cooling System for Tesla battery: Pump, Reservoir, Radiator and Fans. These are essential to keep the Tesla battery pack cool and safe. Very High quality name brand Dash-AN fittings and hose used through out.
1000 Watt DC/DC Converter: Provides 12 Volt out-put to keep all of your 12 Volt systems running
Battery Box: 5mm Aluminium
Contactor Box: Splash-Proof Sealed IP68 Rated
Traction Pack Cable: 15 meters length, 70 mm2 Double Insulated
Battery Voltage: 125 Volts, 30 Cell
Battery Type: 212 Ah 5.3kWh Tesla
Battery Capacity: 26.5 kWh
Traction Pack Fuse: Ferraz Shamut
Inertia Safety Switch: This is a mandatory component to pass safety inspection in all Australian states. This switch will disconnect HazV in the event of a collision.
HazV Labeling Decals: These decals are for all enclosures and visible conduits i.e. battery boxes, contactor box and cable routes to the rear of vehicle. Also a requirement for safety inspection.
Battery Hardware: M8 Stainless
Other Included Hardware: Gland Nuts, Conduit Tube for Main Cable, Controller Harness extension, Firewall Backing, Engine Compartment Mounting Plates, Heat Shrink Tubing, Battery Terminal Rings, Battery Box Mounting Hardware. 12 Volt fuses, relays.
Link: (Low Res Sample) NetGain HyPer 9 IS, Dilithium BMS, Tesla Battery Schematic High resolution Wiring Schematic comes with kit or motor purchase.
Link: NetGain HyPer 9 Motor 3D CAD File
Link: NetGain HyPer Drive AC-X1 Controller 3D CAD File
Link: NetGain HyPer 9 Installation and Operation Manual
Link: DiLithium Designs BMS Cell Harness Diagram
Link: DiLithium Designs BMS and TSM2500 Charger Diagram
Link: DiLithium Designs BMS User Manual V2.2
Link: DiLithium Designs BMS Quick Start Guide
Link: NCOP14 Electric Vehicle Guidelines. Must read information for your EV Conversion in Australia
Volkswagen VW Beetle/Bug EV Conversion Complete Kit, Regen Brakes, Battery Packs 1956-1977