Description
TC Charger 4th Generation 6.6KW 70 to 680V HK-LF EV AC Charger OBC On Board Charger Air Cooled is an easy to use and highly configurable charger. The TC HK-LF Charger is controllable either CAN or basic Enable function. The HK-LF Series of chargers use a CAN Protocol which is common to most major BMS used in EV Conversions such as Thunderstruck Motors Dilithium Designs and Orion allowing system designers and users to integrate, control and monitor this HK-LF series charger easily.
The HK-LF Air-Cooled charger comes in 4 voltage ranges
- 108V Nominal. Voltage range of 70~170V. Maximum current output of 64A
- 144V Nominal. Voltage range of 95~202V. Maximum current output of 46A
- 312V Nominal. Voltage range of 200~450V. Maximum current output of 20A
- 540V Nominal. Voltage range of 400~680V. Maximum current output of 12A
Traction EV stock this charger in 500k baud rate, 250k available upon request.
Contact for freight/postage options.
1. Up to 95% power efficiency and more than 93% Full Load Efficiency
2. Wide input voltage range AC90V~AC264V 45~65 Hz available for worldwide requirements, convenient for electric-network fluctuation and vehicle exportation.
3. Intelligent temperature compensation function in the charging process, preventing damage to the battery caused by charge-off or charge due, greatly extending the lifespan of the battery.
4. Fully-sealed and water-proof, protection class IP67(Effective against dust tight and Protection against Immersion, up to 1 m depth).
5.Operation temperature：- 40℃～85℃；Storage temperature：- 55℃～85℃；Mechanical impact and vibration grade：QC/T 895－2011，Automotive-grade seismic rating.
6. Temperature control with the built-in heat-sensing device and automatic recovery through thermal protection.
7. Multi-safety protection functions.
8. LED charge status indication with diagnosing support function.
9. Available for various kinds of batteries like LiFePO4, Lithium battery, etc., Flexible and programmable in charging mode. Equipped with Enable Control(Automatic Control) or CAN communication interface to realize real-time communication with BMS for options.
10. Input current: dependent on model selected
11. Power factor：≥0.99
12. Charging control: CAN or Enable
13. Size：198(length) x 244(width) x 95(height)(fan-cooled)
14. Weight only 7.6 kg!
15. Cooling way: Fan Forced Air Cooling
2. Wide input voltage range AC90V~AC264V 45~65 Hz available for worldwide requirements, convenient for electric-network fluctuation and vehicle exportation.
3. Intelligent temperature compensation function in the charging process, preventing damage to the battery caused by charge-off or charge due, greatly extending the lifespan of the battery.
4. Fully-sealed and water-proof, protection class IP67(Effective against dust tight and Protection against Immersion, up to 1 m depth).
5.Operation temperature：- 40℃～85℃；Storage temperature：- 55℃～85℃；Mechanical impact and vibration grade：QC/T 895－2011，Automotive-grade seismic rating.
6. Temperature control with the built-in heat-sensing device and automatic recovery through thermal protection.
7. Multi-safety protection functions.
8. LED charge status indication with diagnosing support function.
9. Available for various kinds of batteries like LiFePO4, Lithium battery, etc., Flexible and programmable in charging mode. Equipped with Enable Control(Automatic Control) or CAN communication interface to realize real-time communication with BMS for options.
10. Input current: dependent on model selected
11. Power factor：≥0.99
12. Charging control: CAN or Enable
13. Size：198(length) x 244(width) x 95(height)(fan-cooled)
14. Weight only 7.6 kg!
15. Cooling way: Fan Forced Air Cooling
Safety protection:
1) Input over/under voltage and reverse polarity protection;
2) Output over current/short circuit and over temp protection.
1) Input over/under voltage and reverse polarity protection;
2) Output over current/short circuit and over temp protection.
