Perfect for almost any conversion.

Drop in replacement for the discontinued Gigavac HBD series of switches.

This Power Maintenance Disconnect Switch is intended to be used as a periodic maintenance switch, and daily switching and emergency cut off should be performed by contactors, switches with a higher break current rating.

Features:
Hermetically sealed. Can be used in dusty, wet, and flammable environments.
Sealed contacts ensures low voltage drop.
Fibre composite housing and hermetic seal prevent corrosion inside and out.
Lock-out / Tag-out meets WHS requirements.
Continuous rating: 400A. Overload 1 minute rating: 2000A.

Download HVDB Series Datasheet

This item will have $9.95 shipping included in the price.
A small flat-rate shipping fee of $9.95 is already factored into the price, so there are no extra charges at checkout.

The post Rincon Power Maintenance Disconnect Switch HVBD 400AXR 1000V 400A Continuous appeared first on Traction EV.

Manual locking disconnect for your traction battery pack, very positive engagements and has a rating of 1000V at 400 amps continuous. This switch can withstand current as high as 2000 amps for 1 minute. Perfect for almost any conversion.  This switch is intended to be used as a periodic maintenance switch, and daily switching and emergency cut off should be performed by contactors, or switches with a higher break current rating.

Features:
Hermetically sealed. Can be used in dusty, wet, and flammable environments.
Sealed contacts ensures low voltage drop.
Fibre composite housing and hermetic seal prevent corrosion inside and out.
Lock-out / Tag-out meets OSHA requirements.
Continuous rating: 400A. Overload 1 minute rating: 2000A.

The post Gigavac Maintenance Switch HBD41AA 1000V 400A Continuous appeared first on Traction EV.

The Gigavac Maintenance Switch is a manual locking disconnect for your traction battery pack, very positive engagements and has a rating of 1000V at 1000 amps continuous when both poles are used in parallel (500 amps each pole). This Gigavac Maintenance Switch can withstand current as high as 4000 amps for 1.5 minutes so this should work for just about any motor and controller combo we sell here at Traction EV.

This switch is intended to be used as a periodic maintenance switch, and daily switching and emergency cut off should be performed by contactors, or switches with a higher break current rating.

Switch Type: DPST
Continuous rating: 2x500A
Overload 1.5 minute rating: 4000A using both poles in parallel (2x2000A)
Overload 10 sec rating: 5000A using both poles in parallel (2x2500A)
Max carrying voltage: 1000V
Max switching voltage: 32V at 500A (1000V at 10A)
Construction: Fiber composite housing

Dimensions:
Length: 120mm (4.72 Inch)
Width: 84.8mm (3.34 Inch)
Total Height: 115.2mm (4.54 Inch)

Additional Features:
Lockable both in off and on positions
Lock-out / Tag-out meets OSHA requirements

The post Gigavac Maintenance Switch BD9523 1000V 1000A Continuous appeared first on Traction EV.