Regenerative Brakes – Traction EV https://tractionev.com Traction EV has a large range of high quality components, conversion kits and batteries for your Electric Vehicle or EV Conversion. Fri, 29 Aug 2025 00:50:25 +0000 en-US hourly 1 https://wordpress.org/?v=7.1 https://tractionev.com/wp-content/uploads/2021/02/favicon.ico Regenerative Brakes – Traction EV https://tractionev.com 32 32 Amphenol Brake Pressure Transducer for Regenerative Brake Signal – 5 Volt – 1000 psi https://tractionev.com/product/amphenol-brake-pressure-transducer-for-regenerative-brake-signal-5-volt-1000-psi/ Fri, 28 May 2021 00:52:00 +0000 https://tractionev.com/?post_type=product&p=1203 The Amphenol Brake Pressure Transducer - 5 Volt, 1000 psi - is an excellent product to provide brake pressure signal to the motor controller. electric pressure transducer works well in almost all applications for feeding a brake pressure signal to the motor controller.

 

The post Amphenol Brake Pressure Transducer for Regenerative Brake Signal – 5 Volt – 1000 psi appeared first on Traction EV.

]]> The Amphenol Brake Pressure Transducer is an excellent product to provide brake pressure signal to the motor controller. SSI Technologies electric brake pressure transducer is the best product to provide brake pressure signal to the motor controller. We recommend the use of a brake pressure transducer to enable variable motor regeneration.

This transducer is our preferred sensor for use with NetGain HyPer 9 motor systems and the Curtis 1238/1239 controllers.  The Amphenol Sensor provides a very clean smooth signal output which translates to a nice smooth regen-braking with no signal interference.

Simple 1/8 inch NPT thread pattern will fit most applications, including all older Volkswagen and Porsche applications.

This “T” adaptor fitting comes free with the purchase of a Brake Pressure Transducer.
Adaptor Fitting for Brake Pressure Transducer 1/8 NPT Thread

Input Pressure Range: 0 to 1000 psi
Input Voltage: 5 Volts DC
Output Voltage: 0.5 – 4.5 Volts DC
Output Type: Linear
Thread Size: 1/8-27 NPT
Body Material: 316 Stainless Steel
Warranty Period: One year

Schematic:
Red – + 5 Volt
Black – 5 Volt Ground
White – Signal Out

 

This item will have $9.95 shipping included in the price.
A small flat-rate shipping fee of $9.95 is already factored into the price, so there are no extra charges at checkout.

The post Amphenol Brake Pressure Transducer for Regenerative Brake Signal – 5 Volt – 1000 psi appeared first on Traction EV.

]]> Adapter Fitting for Brake Pressure Transducer 1/8 NPT Thread https://tractionev.com/product/adapter-fitting-for-brake-pressure-transducer/ Wed, 06 Nov 2019 22:44:20 +0000 https://tractionev.com/?post_type=product&p=790 Adapter Fitting for Brake Pressure Transducer. This adapter fitting with a 1/8 NPT thread allows a brake pressure transducer to be fitted to a brake master cylinder. Suitable for most brake systems.

 

The post Adapter Fitting for Brake Pressure Transducer 1/8 NPT Thread appeared first on Traction EV.

]]> Adapter Fitting for Brake Pressure Transducer.

This fitting allows a brake pressure transducer to be fitted to a brake master cylinder. Simply install this fitting between a brake hard-line fitting and the brake master cylinder. An electric pressure transducer works well feeding a brake pressure indication via a signal to the motor controller.

Our brake pressure transducer works very well with the NetGain AC-X1 and HyPer-Drive controllers, as well as the Curtis 1238/1239 controllers. We highly recommend the use of a brake pressure transducer to enable variable motor regeneration. The 1/8 NPT thread will fit Volkswagen, Porsche, Classic Ford and many other brake systems.

This fitting comes free with the purchase of a Brake Pressure Transducer.

Thread Size: 1/8 – 27 NPT
Body Material: Brass

This item qualifies for free shipping.
Enjoy fast, reliable delivery at no additional cost—shipping is completely free with this purchase.

 

The post Adapter Fitting for Brake Pressure Transducer 1/8 NPT Thread appeared first on Traction EV.

]]> Brake Pressure Transducer for Regenerative Brake Signal Generic- 5 Volt – 1000 psi https://tractionev.com/product/brake-pressure-transducer-regen/ Wed, 01 Jul 2015 11:00:54 +0000 http://tractionev.com/?post_type=product&p=141 This electric pressure transducer works well in almost all applications for feeding a brake pressure signal to the motor controller.

The post Brake Pressure Transducer for Regenerative Brake Signal Generic- 5 Volt – 1000 psi appeared first on Traction EV.

]]> We no longer stock this item as we found it to be unsuitable for the NetGain HyPer 9 systems. Please see the appropriate transducer here – Amphenol Transducer

This generic electric brake pressure transducer works well in almost all applications for feeding a brake pressure signal to the motor controller. This brake pressure transducer works very well with the Curtis 1238/1239 controllers, and we recommend use of a brake pressure transducer to enable variable motor regeneration. Simple 1/8 inch NPT thread pattern will fit most applications, including all older Volkswagen and Porsche applications.

The below “T” fitting comes free with the purchase of our Brake Pressure Transducer.
Adaptor Fitting for Brake Pressure Transducer 1/8 NPT Thread

Input Pressure Range: 0 to 1000 psi
Input Voltage: 5 Volts DC
Output Voltage: 0.5 – 4.5 Volts DC
Output Type: Linear
Thread Size: 1/8-27 NPT
Body Material: 316 Stainless Steel
Warranty Period: One year

Schematic:
Red – 5 Volt DC
Black – 5 Volt Ground
Blue – Signal Output

The post Brake Pressure Transducer for Regenerative Brake Signal Generic- 5 Volt – 1000 psi appeared first on Traction EV.

]]>