Mennekes – Traction EV https://tractionev.com Traction EV has a large range of high quality components, conversion kits and batteries for your Electric Vehicle or EV Conversion. Thu, 01 Jan 2026 16:25:25 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.2 https://tractionev.com/wp-content/uploads/2021/02/favicon.ico Mennekes – Traction EV https://tractionev.com 32 32 Stealth EV Combo 3.3KW 108V Air cooled Charger+1KW DC/DC Converter CAN Controlled OBC On Board Charger https://tractionev.com/product/stealth-ev-combo-3-3kw-108v-air-cooled-charger1kw-dc-dc-converter-can-controlled-obc-on-board-charger/ Mon, 09 Dec 2024 01:00:10 +0000 https://tractionev.com/?post_type=product&p=3059 Stealth EV Combo 3.3KW 108V Air cooled Charger+1KW DC/DC Converter CAN Controlled OBC On Board Charger is an easy to use and highly configurable charger. The Stealth EV Charger is controllable via CAN. The Stealth EV chargers use a CAN Protocol which is common to most major BMS used in EV Conversions.

 

The post Stealth EV Combo 3.3KW 108V Air cooled Charger+1KW DC/DC Converter CAN Controlled OBC On Board Charger appeared first on Traction EV.

]]> Stealth EV Combo 3.3KW 108V Air cooled Charger+1KW DC/DC Converter CAN Controlled OBC On Board Charger is an easy to use and highly configurable charger. The Stealth EV Charger is controllable via CAN using your BMS of choice, such as the Orion2 BMS. The Stealth EV charger uses a CAN Protocol which is common to the Orion2 BMS allowing simple CAN configuration by selecting the Stealth EV charger from a drop down menu in the Orion BMS Software Utility.

The Stealth EV Combo OBC+DCDC is set to 250k Baud Rate.

Contact for freight/postage options.

1. Up to 95% power efficiency and more than 93% Full Load Efficiency
2. Wide input voltage range AC90V~AC264V 45~65 Hz available for worldwide requirements, convenient for electric-network fluctuation and vehicle exportation.
3. Intelligent temperature compensation function in the charging process, preventing damage to the battery caused by charge-off or charge due, greatly extending the lifespan of the battery.
4. Fully-sealed and water-proof, protection class IP67(Effective against dust tight and Protection against Immersion, up to 1 m depth).
5.Operation temperature：- 40℃～85℃；Storage temperature：- 55℃～85℃；Mechanical impact and vibration grade：QC/T 895－2011，Automotive-grade seismic rating.
6. Temperature control with the built-in heat-sensing device and automatic recovery through thermal protection.
7. Multi-safety protection functions.
8. Available for various kinds of batteries like LiFePO4, Lithium battery, etc., Flexible and programmable in charging mode. Equipped with CAN communication interface to realize real-time communication with BMS for options.
10. Input current: dependent on model selected
11. Power factor：≥0.99
12. Charging control: CAN
13. Size：381 x 381 x 203.2 mm   L x W x H
14. Weight only 10.9 kg!
15. Cooling: Fan Forced Air Cooling
Safety protection:
1) Input over/under voltage and reverse polarity protection;
2) Output over current/short circuit and over temp protection.
Product File Links:
This item will have $44.95 shipping included in the price.
A flat shipping cost of $44.95 has been included in the purchase price, making checkout simple and transparent.

The post Stealth EV Combo 3.3KW 108V Air cooled Charger+1KW DC/DC Converter CAN Controlled OBC On Board Charger appeared first on Traction EV.

]]> TC Charger 4th Generation 6.6KW 70 to 680V HK-LF EV AC Charger OBC On Board Charger Air Cooled https://tractionev.com/product/tc-charger-4th-generation-6-6kw-70-to-680v-hk-lf-ev-ac-charger-obc-on-board-charger-air-cooled/ Sat, 08 Jun 2024 10:39:38 +0000 https://tractionev.com/?post_type=product&p=2897 TC Charger 4th Generation 6.6KW 70 to 680V HK-LF EV AC Charger OBC On Board Charger Air Cooled is an easy to use and highly configurable charger. The TC HK-LF Charger is controllable either CAN or basic Enable function. The HK-LF Series of chargers use a CAN Protocol which is common to most major BMS used in EV Conversions.

 

 

The post TC Charger 4th Generation 6.6KW 70 to 680V HK-LF EV AC Charger OBC On Board Charger Air Cooled appeared first on Traction EV.

]]> TC Charger 4th Generation 6.6KW 70 to 680V HK-LF EV AC Charger OBC On Board Charger Air Cooled is an easy to use and highly configurable charger. The TC HK-LF Charger is controllable either CAN or basic Enable function. The HK-LF Series of chargers use a CAN Protocol which is common to most major BMS used in EV Conversions such as Thunderstruck Motors Dilithium Designs and Orion allowing system designers and users to integrate, control and monitor this HK-LF series charger easily.
The HK-LF Air-Cooled charger comes in 4 voltage ranges
  • 108V Nominal. Voltage range of 70~170V. Maximum current output of 64A
  • 144V Nominal. Voltage range of 95~202V. Maximum current output of 46A
  • 312V Nominal. Voltage range of 200~450V. Maximum current output of 20A
  • 540V Nominal. Voltage range of 400~680V. Maximum current output of 12A

Traction EV stock this charger in 500k baud rate, 250k available upon request.

 

1. Up to 95% power efficiency and more than 93% Full Load Efficiency
2. Wide input voltage range AC90V~AC264V 45~65 Hz available for worldwide requirements, convenient for electric-network fluctuation and vehicle exportation.
3. Intelligent temperature compensation function in the charging process, preventing damage to the battery caused by charge-off or charge due, greatly extending the lifespan of the battery.
4. Fully-sealed and water-proof, protection class IP67(Effective against dust tight and Protection against Immersion, up to 1 m depth).
5.Operation temperature：- 40℃～85℃；Storage temperature：- 55℃～85℃；Mechanical impact and vibration grade：QC/T 895－2011，Automotive-grade seismic rating.
6. Temperature control with the built-in heat-sensing device and automatic recovery through thermal protection.
7. Multi-safety protection functions.
8. LED charge status indication with diagnosing support function.
9. Available for various kinds of batteries like LiFePO4, Lithium battery, etc., Flexible and programmable in charging mode. Equipped with Enable Control(Automatic Control) or CAN communication interface to realize real-time communication with BMS for options.
10. Input current: dependent on model selected
11. Power factor：≥0.99
12. Charging control: CAN or Enable
13. Size：198(length) x 244(width) x 95(height)(fan-cooled)
14. Weight only 7.6 kg!
15. Cooling way: Fan Forced Air Cooling
Safety protection:
1) Input over/under voltage and reverse polarity protection;
2) Output over current/short circuit and over temp protection.
This item will have $44.95 shipping included in the price.
A flat shipping cost of $44.95 has been included in the purchase price, making checkout simple and transparent.

The post TC Charger 4th Generation 6.6KW 70 to 680V HK-LF EV AC Charger OBC On Board Charger Air Cooled appeared first on Traction EV.

]]> Mennekes Type 2 Level 2 32 Amp Charge Port 1 Meter Cable Pre-Terminated Pins https://tractionev.com/product/mennekes-type-2-charge-port/ Thu, 01 Dec 2022 05:04:36 +0000 https://tractionev.com/?post_type=product&p=2410 The go-to standard for electric vehicles, the Mennekes Type 2 Level 2 32 Amp Charge Port is quickly becoming the most common plug found at public charging stations and can be used in either single phase or 3 phase applications.

 

The post Mennekes Type 2 Level 2 32 Amp Charge Port 1 Meter Cable Pre-Terminated Pins appeared first on Traction EV.

]]> The Mennekes Type 2 Level 2 32 Amp Charge Port is the go to standard for electric vehicles. This charge port can be used in either single phase or 3 phase applications.

Type 2 is the most common plug found at public charging stations and allows AC charging with a hard-wired EVSE at home, the office, friend’s house or any where there is a general purpose outlet 10 amp or 15 amp, with the use of a portable Type 2 Cable.

This socket comes with pre-terminated pins and 1 meter of harness for ease of installation.

Check out our Portable Type 2 Charging Cable.

 

This item will have $9.95 shipping included in the price.
A small flat-rate shipping fee of $9.95 is already factored into the price, so there are no extra charges at checkout.

The post Mennekes Type 2 Level 2 32 Amp Charge Port 1 Meter Cable Pre-Terminated Pins appeared first on Traction EV.

]]> Orion 2 Battery Management System BMS 24 Cell Complete Kit https://tractionev.com/product/orion-2-bms-battery-management-system-bms-24-cell-complete-kit/ Mon, 25 Aug 2025 22:53:16 +0000 https://tractionev.com/?post_type=product&p=3119 Orion 2 BMS Battery Management System

 

The post Orion 2 Battery Management System BMS 24 Cell Complete Kit appeared first on Traction EV.

]]> Orion 2 BMS Battery Management System

 

The Orion BMS is one of the leading battery management systems on the market today. Known for its durability, flexibility, and American-made quality, it has been trusted for more than a decade by OEMs, Motorsports teams, and DIY builders to safeguard lithium-ion battery packs.

  • Significantly smaller enclosure size for 24-72 cell configurations.
  • Roughly 40% lower weight on all models due to the new enclosure design and streamlined (removable) heatsink. Minimum heat dissipation requirements apply.
  • Considerable boosts in measurement accuracy and processor speed allow for more advanced calculations and logic.
  • Direct hardware support for several popular charging protocols including hardware support for both SAE J1772 Type1 and IEC Mennekes Type 2 (directly interfacing with the pilot / proximity lines) and CHAdeMO for DC fast charging. CCS2 is also possible with the addition of the Fellten CCS2 System, contact us for more information.
  • Wider input power voltage range (now 12v-24vDC compatible) for better support on heavy vehicles and equipment. The Orion 2 BMS remains fully compatible with 12v applications.
  • Ability to directly drive certain contactors on select inputs (bypassing the need for intermediate signal relays in some situations)–see supporting documentation for details.
  • Completely redesigned multi-unit series configuration (now using Remote Cell Tap Expansion Modules). This greatly simplifies connecting multiple units together in series and improves the overall reliability.
  • New Status LED on the unit to indicate power status and the presence of faults.
  • Addition of 2x new Multi-Purpose Output pins with programmable functions.
  • Significant algorithm and software enhancements to improve overall system accuracy for parameters such as State of Charge and pack health.

 

  • Capable of measuring up to 24 battery cells connected in series.
  • Configurations available in increments of 12 cells in series.
  • Centralized design provides high EMI and noise immunity.
  • Performs intelligent cell balancing (passive).
  • Calculates state of charge (SOC).
  • Uses professional automotive-grade locking connectors.
  • Calculates discharge current limit (DCL) and charge current limit (CCL).
  • Can measure cell voltages between 0.5v and 5.0v.
  • Dual (x2) CANBUS 2.0B interfaces which (fully programmable).
  • OBD2 diagnostic protocol support.
  • See the complete list of features: https://www.orionbms.com/features/basic-features
  • Link: Orion 2 Specifications Sheet pdf

 

Comes with

  • 2 x 24 cell harnesses
  • I/O Harness
  • Hall Current Sensor
  • Thermistor Harness with 8 inputs
  • CANdapter for programming via PC

 

Manuals Downloads

Link: Orion 2 BMS Wiring Manual

Link: Orion 2 BMS Operation Manual

 

This item will have $19.95 shipping included in the price.
A small flat-rate shipping fee of $19.95 is already factored into the price, so there are no extra charges at checkout.

The post Orion 2 Battery Management System BMS 24 Cell Complete Kit appeared first on Traction EV.

]]>