EV – Traction EV https://tractionev.com Traction EV has a large range of high quality components, conversion kits and batteries for your Electric Vehicle or EV Conversion. Thu, 07 May 2026 05:51:33 +0000 en-US hourly 1 https://wordpress.org/?v=7.0.2 https://tractionev.com/wp-content/uploads/2021/02/favicon.ico EV – Traction EV https://tractionev.com 32 32 Blank Flywheel Coupler https://tractionev.com/product/blank-flywheel-coupler/ Wed, 03 Sep 2025 01:51:52 +0000 https://tractionev.com/?post_type=product&p=3176 Blank flywheel coupler suits B-Face motors such as HPEVS and NetGain. The coupler has a 1-1/8" inch bore with a 1/4" key-way.

 

Use this blank flywheel coupler to easily produce your own flywheel coupler to match which ever transmission you're using in your EV conversion.

The post Blank Flywheel Coupler appeared first on Traction EV.

]]> Blank flywheel coupler suits B-Face motors such as HPEVS and NetGain. The coupler has a 1-1/8″ inch bore with a 1/4″ key-way.

 

Use this blank flywheel coupler to easily produce your own flywheel coupler to match which ever transmission you’re using in your EV conversion.

 

This item will have $9.95 shipping included in the price.
A small flat-rate shipping fee of $9.95 is already factored into the price, so there are no extra charges at checkout.

The post Blank Flywheel Coupler appeared first on Traction EV.

]]> Stealth EV Combo 3.3KW 108V Air cooled Charger+1KW DC/DC Converter CAN Controlled OBC On Board Charger https://tractionev.com/product/stealth-ev-combo-3-3kw-108v-air-cooled-charger1kw-dc-dc-converter-can-controlled-obc-on-board-charger/ Mon, 09 Dec 2024 01:00:10 +0000 https://tractionev.com/?post_type=product&p=3059 Stealth EV Combo 3.3KW 108V Air cooled Charger+1KW DC/DC Converter CAN Controlled OBC On Board Charger is an easy to use and highly configurable charger. The Stealth EV Charger is controllable via CAN. The Stealth EV chargers use a CAN Protocol which is common to most major BMS used in EV Conversions.

 

The post Stealth EV Combo 3.3KW 108V Air cooled Charger+1KW DC/DC Converter CAN Controlled OBC On Board Charger appeared first on Traction EV.

]]> Stealth EV Combo 3.3KW 108V Air cooled Charger+1KW DC/DC Converter CAN Controlled OBC On Board Charger is an easy to use and highly configurable charger. The Stealth EV Charger is controllable via CAN using your BMS of choice, such as the Orion2 BMS. The Stealth EV charger uses a CAN Protocol which is common to the Orion2 BMS allowing simple CAN configuration by selecting the Stealth EV charger from a drop down menu in the Orion BMS Software Utility.

The Stealth EV Combo OBC+DCDC is set to 250k Baud Rate.

Contact for freight/postage options.

1. Up to 95% power efficiency and more than 93% Full Load Efficiency
2. Wide input voltage range AC90V~AC264V 45~65 Hz available for worldwide requirements, convenient for electric-network fluctuation and vehicle exportation.
3. Intelligent temperature compensation function in the charging process, preventing damage to the battery caused by charge-off or charge due, greatly extending the lifespan of the battery.
4. Fully-sealed and water-proof, protection class IP67(Effective against dust tight and Protection against Immersion, up to 1 m depth).
5.Operation temperature：- 40℃～85℃；Storage temperature：- 55℃～85℃；Mechanical impact and vibration grade：QC/T 895－2011，Automotive-grade seismic rating.
6. Temperature control with the built-in heat-sensing device and automatic recovery through thermal protection.
7. Multi-safety protection functions.
8. Available for various kinds of batteries like LiFePO4, Lithium battery, etc., Flexible and programmable in charging mode. Equipped with CAN communication interface to realize real-time communication with BMS for options.
10. Input current: dependent on model selected
11. Power factor：≥0.99
12. Charging control: CAN
13. Size：381 x 381 x 203.2 mm   L x W x H
14. Weight only 10.9 kg!
15. Cooling: Fan Forced Air Cooling
Safety protection:
1) Input over/under voltage and reverse polarity protection;
2) Output over current/short circuit and over temp protection.
Product File Links:
This item will have $44.95 shipping included in the price.
A flat shipping cost of $44.95 has been included in the purchase price, making checkout simple and transparent.

The post Stealth EV Combo 3.3KW 108V Air cooled Charger+1KW DC/DC Converter CAN Controlled OBC On Board Charger appeared first on Traction EV.

]]> TC Charger 4th Generation 6.6KW 70 to 680V HK-LF EV AC Charger OBC On Board Charger Air Cooled https://tractionev.com/product/tc-charger-4th-generation-6-6kw-70-to-680v-hk-lf-ev-ac-charger-obc-on-board-charger-air-cooled/ Sat, 08 Jun 2024 10:39:38 +0000 https://tractionev.com/?post_type=product&p=2897 TC Charger 4th Generation 6.6KW 70 to 680V HK-LF EV AC Charger OBC On Board Charger Air Cooled is an easy to use and highly configurable charger. The TC HK-LF Charger is controllable either CAN or basic Enable function. The HK-LF Series of chargers use a CAN Protocol which is common to most major BMS used in EV Conversions.

 

 

The post TC Charger 4th Generation 6.6KW 70 to 680V HK-LF EV AC Charger OBC On Board Charger Air Cooled appeared first on Traction EV.

]]> TC Charger 4th Generation 6.6KW 70 to 680V HK-LF EV AC Charger OBC On Board Charger Air Cooled is an easy to use and highly configurable charger. The TC HK-LF Charger is controllable either CAN or basic Enable function. The HK-LF Series of chargers use a CAN Protocol which is common to most major BMS used in EV Conversions such as Thunderstruck Motors Dilithium Designs and Orion allowing system designers and users to integrate, control and monitor this HK-LF series charger easily.
The HK-LF Air-Cooled charger comes in 4 voltage ranges
  • 108V Nominal. Voltage range of 70~170V. Maximum current output of 64A
  • 144V Nominal. Voltage range of 95~202V. Maximum current output of 46A
  • 312V Nominal. Voltage range of 200~450V. Maximum current output of 20A
  • 540V Nominal. Voltage range of 400~680V. Maximum current output of 12A

Traction EV stock this charger in 500k baud rate, 250k available upon request.

 

1. Up to 95% power efficiency and more than 93% Full Load Efficiency
2. Wide input voltage range AC90V~AC264V 45~65 Hz available for worldwide requirements, convenient for electric-network fluctuation and vehicle exportation.
3. Intelligent temperature compensation function in the charging process, preventing damage to the battery caused by charge-off or charge due, greatly extending the lifespan of the battery.
4. Fully-sealed and water-proof, protection class IP67(Effective against dust tight and Protection against Immersion, up to 1 m depth).
5.Operation temperature：- 40℃～85℃；Storage temperature：- 55℃～85℃；Mechanical impact and vibration grade：QC/T 895－2011，Automotive-grade seismic rating.
6. Temperature control with the built-in heat-sensing device and automatic recovery through thermal protection.
7. Multi-safety protection functions.
8. LED charge status indication with diagnosing support function.
9. Available for various kinds of batteries like LiFePO4, Lithium battery, etc., Flexible and programmable in charging mode. Equipped with Enable Control(Automatic Control) or CAN communication interface to realize real-time communication with BMS for options.
10. Input current: dependent on model selected
11. Power factor：≥0.99
12. Charging control: CAN or Enable
13. Size：198(length) x 244(width) x 95(height)(fan-cooled)
14. Weight only 7.6 kg!
15. Cooling way: Fan Forced Air Cooling
Safety protection:
1) Input over/under voltage and reverse polarity protection;
2) Output over current/short circuit and over temp protection.
This item will have $44.95 shipping included in the price.
A flat shipping cost of $44.95 has been included in the purchase price, making checkout simple and transparent.

The post TC Charger 4th Generation 6.6KW 70 to 680V HK-LF EV AC Charger OBC On Board Charger Air Cooled appeared first on Traction EV.

]]> VW Beetle Kit 1956-1977 NetGain HyPer 9 https://tractionev.com/product/traction-ev-beetle-kit-vw-1956-1977-netgain-hyper-9/ Fri, 05 Apr 2019 22:48:13 +0000 http://tractionev.com/?post_type=product&p=586 Traction EV Beetle Kit to suit Volkswagen VW Beetle/Bug EV Conversion Complete Kit, Regen Brakes, Battery Packs 1956-1977

The post VW Beetle Kit 1956-1977 NetGain HyPer 9 appeared first on Traction EV.

]]> Traction EV Beetle kit is available here in Australia!

Kits in stock!

The VW Type 1 Beetle Kit is very unique in the fact that it truly is a ‘turn-key’ kit. The components were carefully picked out to be the best available for the Beetle, and fit and finish have been refined. This Beetle kit comes with everything you need, and we mean everything, right down to the heat shrink tubing, and fuse holders. Just order the kit, give yourself some spare weekends, and you’ll be on the road.

This complete Beetle kit will deliver 225+ km safe driving distance, and will charge to full in a little under 6 hours. Optional DC FAST Charging available via CHAdeMO providing 16 kW charge rate! The motor power delivery is 100kW and 240 Nm of instant torque, and its top speed is over 160 km/h, definitely fun to drive.

Follow the link here to our build page to see some of our Volkswagen Beetle and other vehicle EV conversions.
https://tractionev.com/in-house-builds/

The Traction EV NetGain HyPer 9 Beetle kit contains the following:

Motor: NetGain HyPer 9 SRIPM Motor 100kW 240Nm with regenerative brakes

Controller: AC-X1 fully user programmable with Windows PC or Laptop

Instrumentation: AC-X1 Compact Display allows you to view controller information and also control regenerative braking profiles on the fly.

Transmission Adaptor Kit: Traction EV Billet Aluminium

Brake Pressure Transducer:  Regen Brake Signal Sensor – High Quality Amphenol Unit

Charger: TC Charger 6.6 kW CAN controlled. Optional DC FAST Charging available which provides 16 kW charge rate!

BMS: DiLithium Design. This BMS communicates with the on-board charger while monitoring cell groups in the Tesla battery modules to keep all cells balanced during charging and driving.

Portable Type 2 Charge Cable: Take your charge cable with you anywhere so you can opportunity charge anytime anywhere from 10 amp, 15 amp or J1172 outlets.

Type 2 Charge Port Inlet: Type 2 Standard Inlet connects to the Thunderstruck Master Control Unit MCU for safe charging of your vehicle and prevention of drive-away whilst charge cable is plugged in.

Chill Plate: Traction EV designed to suit NetGain AC-X1 and has integrated mount.

Cooling System for AC-X1: Pump, Reservoir, Radiator and Fans. These are essential to keep the AC-X1 controller cool and safe. Very High quality name brand Dash-AN fittings and hose used through out.

Cooling System for Tesla battery: Pump, Reservoir, Radiator and Fans. These are essential to keep the Tesla battery pack cool and safe. Very High quality name brand Dash-AN fittings and hose used through out.

1000 Watt DC/DC Converter: Provides 12 Volt out-put to keep all of your 12 Volt systems running

Battery Box: 5mm Aluminium – Powder Coated Black

Contactor Box: Splash-Proof Sealed IP68 Rated

Traction Pack Cable: 15 meters length, 70 mm2 Double Insulated

Battery Voltage: 130 Volts, 32 Cell

Battery Type: 300 Ah CALB Liquid Cooled

Battery Capacity: 35 kWh

Traction Pack Fuse: Ferraz Shamut

Inertia Safety Switch: This is a mandatory component to pass safety inspection in all Australian states. This switch will disconnect HazV in the event of a collision.

HazV Labeling Decals: These decals are for all enclosures and visible conduits i.e.  battery boxes, contactor box and cable routes to the rear of vehicle. Also a requirement for safety inspection.

Battery Hardware: M8 Stainless

Other Included Hardware in our Beetle kit: Gland Nuts, Conduit Tube for Main Cable, Controller Harness extension, Firewall Backing, Engine Compartment Mounting Plates, Heat Shrink Tubing, Battery Terminal Rings, Battery Box Mounting Hardware. 12 Volt fuses, relays.

  • Please Note: Some special tools required
  • Windows Lap-Top/PC for setup
  • 3/4 inch drive socket set with 36mm socket (1/2″ drive breaker bars will bend). Used to remove flywheel from engine and install on electric motor. 3/4″ socket sets are much bigger than most home workshops have. It may be possible to borrow this tool for the one off job.
  • VW Clutch Alignment Tool
  • Soldering Iron (if that’s your thing) we prefer crimp tools
  • Heat Gun – used on heat shrink and can also be used to heat and fit the Flywheel Coupler to the electric motor which is an interference fit.
  • Digital Multi-meter -An absolute must have tool!
  • Hydraulic Cable Crimp Tool – In Stock! Can be found here  – Hydraulic Cable Crimp Tool 16 mm² – 240 mm²
  • Copper Cable Shears – In Stock! Can be found here  – Copper Cable Shears 600 mm / 24 Inch
  • Non-Insulated Terminal Crimp Tool – In Stock! Can be found here – Non-Insualted Terminal Crimp Tool 10 – 22 AWG

Link: (Low Res Sample) NetGain HyPer 9 IS, Dilithium BMS, Tesla Battery Schematic High resolution Wiring Schematic comes with kit or motor purchase.

Link: NetGain HyPer 9 Motor 3D CAD File
Link: NetGain HyPer Drive AC-X1 Controller 3D CAD File
Link: NetGain HyPer 9 Installation and Operation Manual

Link: DiLithium Designs BMS Cell Harness Diagram
Link: DiLithium Designs BMS and TSM2500 Charger Diagram
Link: DiLithium Designs BMS User Manual V2.2
Link: DiLithium Designs BMS Quick Start Guide
Link: NCOP14 Electric Vehicle Guidelines. Must read information for your EV Conversion in Australia

 

Due to the weight of this item, please contact us for a shipping quote.
This product is oversized or heavy, and shipping costs vary. Please reach out for a personalized shipping quote before placing your order.

The post VW Beetle Kit 1956-1977 NetGain HyPer 9 appeared first on Traction EV.

]]> Dilithium Design Electric Vehicle EV Display for Master Control Unit MCU https://tractionev.com/product/dilithium-design-electric-vehicle-ev-display/ Sat, 08 Jun 2024 11:53:55 +0000 https://tractionev.com/?post_type=product&p=2903 Dilithium Design Electric Vehicle EV Display for Master Control Unit MCU displays pack State of Charge, Pack Current, Voltage, and Watts, Thermistors, as well as BMS alarms.

 

The post Dilithium Design Electric Vehicle EV Display for Master Control Unit MCU appeared first on Traction EV.

]]> Dilithium Design Electric Vehicle EV Display for Master Control Unit MCU is extremely handy for showing pack voltage, current and kW, average cell voltage and variation, state of charge, and battery temperature.

For use with the Dilithium Design Master Control Unit (MCU)

A Hall Sensor provides realtime current and state of charge (coulomb counting). Available sensors include options for current up to 1000 Amps. See the Current Sensor page for details and availability.

Analog gauges can be set up with the MCU to show state of charge and other system information (see the “Manuals & Downloads” tab for more information).

Actual display area is 65mm tall by 50mm wide, plus the black bezel for a total size of 100mm x 75mm. The bezel is glass, with 2-sided tape on the back for permanent panel attachment. The display has an exposed circuit board in the rear, and should be enclosed if exposed to moisture or dirt.

User Manual: MCU v1.3

This item will have $4.95 shipping included in the price.
A small flat-rate shipping fee of $9.95 is already factored into the price, so there are no extra charges at checkout.

 

The post Dilithium Design Electric Vehicle EV Display for Master Control Unit MCU appeared first on Traction EV.

]]> Thunderstruck Motors Charger TSM2500 2.5 kW with EVCC https://tractionev.com/product/thunderstruck-motors-charger-2-5kw/ Mon, 10 Feb 2020 07:05:21 +0000 https://tractionev.com/?post_type=product&p=847 Our TSM2500 2.5 kW Thunderstruck Motors Charger is compact, reliable, and easy to set up and use.

 

Please get in touch for shipping details.

We will get back to you within 2 business days.

support@tractionev.com

 

The post Thunderstruck Motors Charger TSM2500 2.5 kW with EVCC appeared first on Traction EV.

]]> The TSM2500 2.5 kW Thunderstruck Motors Charger makes charging simple. Easily configurable using the EVCC (Electric Vehicle Charge Controller) via serial cable. There are only a few basic parameter settings such as Charge to Voltage and Charge Current that you need to set and you will have your charger ready to go in no time.

Need even more charging power? Add a second charger for twice the charging current. The TSM2500 Thunderstruck Motors Charger can be paralleled and easily setup via the EVCC to allow up to 5kW charging.

This charger has J1772 Type 1 functionality allowing you to charge from all J1772 charging stations while also having the added safety feature of Throttle Pedal Safety Interlock. Interlock prevents driving away while still plugged into the charging station.

Traction EV offers this charger in 2 common system voltages:

  • 96V Nominal  (85V min – 130V max)
  • 144V Nominal (120V min – 180V max)
  • 24v, 48v, 72, 312v chargers are available upon request

The TSM2500 is compact at only 280 mm x 230 mm footprint and weighs just 5 kg.

This Thunderstruck Motors Charger integrates easily with the DiLithium Designs CAN BMS system and makes for a clean, simple charging solution.

Link to: Dilithium Designs BMS Controller BMSC

Link to: Dilithium Designs BMS Satellite BMSS

Link: TSM2500 Charger Manual

Link: EVCC Version 3.0 Manual

Link: EVCC Driver Installation Guide

Link: PC Software .zip file

Link: Mac Software .zip file

The post Thunderstruck Motors Charger TSM2500 2.5 kW with EVCC appeared first on Traction EV.

]]> Electric Vehicle Conversion Kit: NetGain HyPer 9 Motor with Tesla Battery https://tractionev.com/product/electric-vehicle-conversion-kit-netgain-hyper9-tesla-battery/ Thu, 06 Feb 2020 01:14:45 +0000 https://tractionev.com/?post_type=product&p=840 Electric Vehicle Conversion Kit, NetGain HyPer 9 Motor, Regen Brakes, complete lithium battery packs.

Our electric vehicle conversion kit is best suited for small to medium sized vehicles for sporty performance, but also works well in medium to large vehicles. It is very unique in the fact that it truly is a 'turn-key' kit. Just choose your vehicle, add your own battery boxes and motor adaptor plate, order the kit, give yourself some spare weekends, and you'll be on the road.

 

The post Electric Vehicle Conversion Kit: NetGain HyPer 9 Motor with Tesla Battery appeared first on Traction EV.

]]> Electric Vehicle Conversion Kit:

Traction EV is proud to offer complete electric vehicle conversion kits here in Australia.

Kits in stock now!

Our electric vehicle conversion kit is best suited for small to medium sized vehicles for sporty performance, but also works well in medium to large vehicles. It is very unique in the fact that it truly is a ‘turn-key’ kit. Just choose your vehicle, add your own battery boxes and motor adaptor plate, order the kit, give yourself some spare weekends, and you’ll be on the road.

If you need help with battery boxes and adaptor plate, no problem, we can make those for you as well.

This complete electric vehicle conversion kit will deliver 150km safe driving distance for a 1000kg vehicle, and will charge to full in a little under 8 hours. Need faster charging, ask us about CHAdeMO DC Fast Charging. The power delivery is 170 lbs/ft or 240 Nm of instant torque, and 130hp or 100kW. This system is a lot of fun in a light weight car and has plenty of power to drive a medium to large vehicle as well.

The Traction EV NetGain HyPer 9 electric vehicle conversion kit contains the following:

Motor: NetGain HyPer 9 SRIPM Motor 100kW 240Nm with regen brakes
Controller: AC-X1 fully user programmable with Windows PC
Instrumentation: AC-X1 Compact Display allows you to view controller information and also control regen braking profiles on the fly.
DiLithium Designs EV Display: Gives live information about battery State of Charge as well as individual cell voltages and allows BMS and Charger Programming.
Brake Pressure Transducer:  Regen Brake Signal
Charger: Thunderstruck TSM2500 2.5kW CAN controlled
BMS: DiLithium Design. This BMS communicates with the on-board charger while monitoring cell groups in the Tesla battery modules to keep all cells balanced during charging and driving.
Portable J1772 Charge Cable: Take your charge cable with you anywhere so you can opportunity charge anytime anywhere from 10 amp, 15 amp or J1772 outlets.
J1772 Charge Port Inlet: J1772 Standard Inlet is synchronised with the Thunderstruck Charger Controller for safe charging of your vehicle and prevention of drive-away whilst charge cable is plugged in.
Chill Plate: NetGain AC-X1
Cooling System: Pump, Reservoir, Radiator and Fans. These are essential to keep the AC-X1 controller as well as your battery pack cool and safe.
1000 Watt DC/DC Converter: Provides 12 Volt out-put to keep all of your 12 Volt systems running
Contactor Box: Splash-Proof Sealed
Traction Pack Cable: 15 meters 70mm2 Double Insulated
Battery Voltage: 125 Volts, 30 Cell
Battery Type: 212 Ah 5.3kWh Tesla
Battery Capacity: 26.5 kWh
Traction Pack Fuse: Ferraz Shamut
Inertia Safety Switch: This is a mandatory component to pass safety inspection in all Australian states. This switch will disconnect HV in the event of a collision.
HV Labelling Decals: These decals are for all enclosures and visible conduits i.e.  battery boxes, contactor box and cable routes to the rear of vehicle. Also a requirement for safety inspection.
Other Included Hardware: Gland Nuts, Heat Shrink Tubing, Battery Terminal Rings, 12 Volt fuses, relays.

Link: NetGain HyPer 9 Motor 3D CAD File
Link: NetGain HyPer Drive AC-X1 Controller 3D CAD File
Link: NetGain HyPer 9 Installation and Operation User Manual RevA_1

Link: DiLithium Designs BMS Cell Harness Diagram
Link: DiLithium Designs BMS and TSM2500 Charger Diagram

Link: NCOP14 Electric Vehicle Guidlines. Must read information for your EV Conversion in Australia

Due to the weight of this item, please contact us for a shipping quote.
This product is oversized or heavy, and shipping costs vary. Please reach out for a personalized shipping quote before placing your order.

The post Electric Vehicle Conversion Kit: NetGain HyPer 9 Motor with Tesla Battery appeared first on Traction EV.

]]>